Misfeed Removal - Sharp MX-B350W Starthandbuch

MISFEED REMOVAL

When a misfeed occurs during copying, the message
" Clear paper path." and the location of the misfeed will
appear.
Check the location and remove the misfeed.
For detailed procedures for removing the misfed paper, see the
User's Manual.
The paper may tear when you remove a misfeed. In
this event, be sure to remove all torn pieces of paper
from the machine.
DOCUMENT FEEDER
(1) Remove the misfed original.
Remove the original from the document feeder.
Check sections A, B, and C in the below shows the
illustration, and remove the misfed original.
● Section A
● Section B
● Section C
(2) Press the [OK] key to make the misfeed
location indicator stop blinking.
(3) Return the originals indicated by the
number in the display to the document
feeder tray and press the [START] key.
Copying will resume from the originals that still remained
when the misfeed occurred.
BYPASS TRAY
(1) Remove any paper remaining in the bypass
tray.
(2) Gently remove the misfed paper from the
bypass tray.
(3) Grasp the side cover open/close handle,
and gently open and close the side cover.
(4) Turn the paper feed knob and feed out the
paper that is inside. (see "Misfeed in the
paper feed area A (page8)")
7