Edit A User Mailbox; Delete A User Mailbox; Set Common Mailbox Sub Address; 13. Using Additional Handsets - Motorola D810-Serie Bedienungsanleitung

D811_IFU_EN.fm Page 21 Friday, September 7, 2007 7:37 PM
Downloaded from www.Manualslib.com
Or
Back
1. If you have previously pressed
, the display shows
.
Menu Select
2. Press
, the text icon is displayed. Press .
Mailboxes with new messages are marked with green dots.
Select
3. Scroll
to the mailbox you want and press .
d
OK
4. Enter the mailbox 4-digit PIN and press
.
Inbox Select
5. Scroll
to and press .
d
Read
6. Scroll
or to the message you want and press .
u d

Edit a user mailbox

Menu Text Messaging Select
1. Press
, is displayed. Press . Scroll
Select
to the mailbox you want to edit and press .
d
OK
2. Enter the 4 digit mailbox password PIN and press
.
Text Settings Select
3. Scroll
or to and press .
u d
Users Select
4. Scroll
or to and press .
u d
5. Scroll
or to the user mailbox you want to edit and
u d
Options
press .
Edit Select
6.
is highlighted, press .
OK
7. Enter the current mailbox PIN and press
.
Save
8. Enter the new name and press
.
Save
9. Enter the new one-digit mailbox number and press
.
Save
10. Enter the new 4-digit mailbox password and press
.
Save
11. Re-enter new 4-digit the password and press
.
Back
12. Press
to return to the previous menu level or to
>
return to standby.

Delete a user mailbox

Menu Text Messaging Select
1. Press
, is displayed. Press . Scroll
Select
to the mailbox you want to edit and press .
d
OK
2. Enter the 4 digit mailbox password PIN and press
.
Text Settings Select
3. Scroll
or to and press .
u d
Users Select
4. Scroll
or to and press .
u d
5. Scroll
or to the user mailbox you want to delete and
u d
Options
press .
Delete Select
6. Scroll
to and press .
d
Yes No
7. Press
to confirm or to cancel.
OK
8. Enter the current mailbox PIN and press
.
Back
9. Press
to return to the previous menu level or to
>
return to standby.

Set common mailbox sub address

The default sub-address setting is 9.
Menu Text Messaging Select
1. Press
, is displayed. Press .
Text Settings Select
2. Scroll
or to and press .
u d
Mailbox Number Select
3. Scroll
to and press .
d
Using additional handsets
manuals search engine
4. Enter the single digit mailbox number you want and press
Save
. If you enter a number already in use, you hear an
error beep. Enter a different number.
Back
5. Press
to return to the previous menu level or to
>
return to standby.

13. Using additional handsets

You can use up to five D811 additional handsets with your
D811 base to extend your phone system without needing to
install extension sockets for each new phone.
Your D811 handset can also be registered to up to 3 other
bases. You can then select the base you would prefer to use.
If you have purchased a D811 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you
must register it to your D811 base before it can be used.

Registering an additional handset

At the base:
1. Press and hold
for 2 seconds until the base Power
p
starts flashing. The base will remain in registration mode for
90 seconds.
At the handset:
Please Register
1. If the handset is new and the display shows
Menu Registration Select
Press . Scroll to . Press .
u
Or
If the handset has already been registered to another base
Menu
the standby display is shown. Press , scroll or to
u d
Registration Select
and press .
Register Handset Select
2.
is highlighted. Press .
3. Bases are displayed. If necessary, scroll
or to a new
u d
base you wish to register your D811 handset to and press
Select
.
OK
4. Enter the system PIN and press
. (Default setting =
0000)
Searching Base X
5. The display shows
(where X is the chosen
Handset Registered
base number) then .
The handset is automatically assigned the next available
handset number.
If registration is not successful first time, please repeat the
process again in case the base registration period ran out of
time.
If there are already 5 handsets registered to the base, the
registration will fail. You must de-register another handset before
you can register the new one.

Select a base

If your D811 handset is registered to more than one base, you
can select which base to use.
Menu Registration Select
1. Press
, scroll or to and press .
u d
21
.