Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D811_IFU_EN.fm Page 18 Friday, September 7, 2007 7:37 PM
Switch your answering machine on
remotely
If you forget to switch your answering machine on, you can do
it remotely from another phone.
1. Dial your telephone number and let it ring. After 20 rings
you will hear your outgoing message.
2. Press *, then enter your security code.
(Default setting = 0000)
3. Press
to answer incoming calls.
Time saver
When you ring in to access your messages remotely, if your
answering machine is set to time saver and you have new
messages it will answer after 2 rings, if you do not have any
new messages, it will answer after 6 rings. This means you can
hang up after 3 rings knowing you have no new messages,
saving you time and the cost of the call.
You cannot use this feature if you have certain network features
active as the call will be intercepted before the 20 rings.
Play messages
1. Dial your phone number. When you hear your outgoing
message, press
2. Enter your 4 digit PIN. (Default setting = 0000)
3. Use the keypad to operate your answering machine:
1
2
3
4
5
6
7
8
9
0
If you have any new messages they will be played after you
have entered your security PIN code.
If you enter an incorrect PIN code you will hear 'Incorrect
security code. Please enter your security code'. You can try
entering the code again. If it is still incorrect you will hear the
18
Downloaded from
www.Manualslib.com
voice prompt and your D811 will hang up.
and your answering machine will switch on ready
0
.
*
To hear main menu
To play messages
To play new messages
To skip back during messages
To delete during messages
To skip forward during messages
To set to answer only or answer and record
To record a new outgoing message
To set answer off
To set answer on
manuals search engine
12. Text messaging
Welcome to the text messaging Service on your D811. Your
D811 can send and receive text messages from participating
mobile networks and compatible landline telephones in the UK.
IMPORTANT
You must subscribe to your Network Provider's Caller Display
service so that you can use text messaging and you must not
withhold your telephone number.
A quarterly fee may be payable, please contact your network
provider for more details.
Subscribe to the text messaging
service
When you send your first text message from your D811 you will
automatically be registered for the service.
If you have Set-Up problems, please check with your Network
provider.
Send a text message
If you are writing a text and you receive a call, the text will be
Write Message
displayed again when
is selected.
Menu
Text Messaging
Select
1. Press
,
is displayed, press
.
Write Message
Select
2.
is highlighted. Press
.
3. Use the keypad to enter your message.
Options
4. Press
.
Send
Select
is highlighted Press
to send the message. Enter the
Search
phone number or press
to open the
phonebook then scroll to the number you
Select
Send
want and press
. Now press
.
Or scroll
or
to:
u
d
Save
Select
Press
to save the message in the
Drafts folder.
Insert Symbol
Select
Press
. The symbol table is displayed.
Press
or
to highlight the symbol you
u
d
Insert
want then press
.
.
,
-
?
!
¡
¿
'
@ :
;
/
"
(
)
_
+ & % *
=
<
€
>
$
¤
\
~
#
§
£
¥
Text messaging
Werbung
Inhaltsverzeichnis
