Demolition And Disposal - Palazzetti Royal Rondine Air Serie Installations- Und Wartungsanleitungen

10 DEMOLITION AND
DISPOSAL
The demolition and disposal of the appliance are
the sole liability and responsibility of the owner
who must act in compliance with the laws in
force in their country regarding safety, respect
and protection of the environment.
Disposal can be entrusted to a third party, provid-
ed only companies authorised for the recovery
and elimination of the materials in question are
used.
Always follow the regulations in force
in the Country where the appliance
is in operation for the disposal of ma-
terials and possibly for the disposal
notification.
All disassembly operations for demo-
lition must take place with the appli-
ance stopped and without the power
supply.
• Remove all the electrical equipment.
• Separate the accumulators on the electronics
boards.
• Discard the structure of the appliance using
authorised companies.
Leaving the appliance in accessible
areas is a serious danger to people and
animals.
The differentiated disposal of the product makes
it possible to avoid potentially negative conse-
quences on the environment and health, and
also allows recycling of the materials making up
the product in order to achieve significant energy
and resource savings.
004778620 - 23/11/2020
ITALIANO ENGLISH DEUTSCH
Any liability for damage to people and animals
always falls on the owner. Upon demolition, the
EC marking, this manual and other documents
relating to this appliance must be destroyed.
The crossed-out wheelie bin symbol that appears
on the label of the appliance indicates that, at
the end of its useful life, the product must be
disposed of separately from other waste.
Pursuant to art.13 of Italian Legislative Decree
no. 151 of 25 July 2005 implementing the Direc-
tive 2002/96/EC of 23 February 2003 on Waste
Electrical and Electronic Equipment relating
to the measures and procedures designed to
prevent the production of waste electrical and
electronic equipment, called WEEE, promoting
the reuse, recycling and other forms of recovery
so as to reduce the quantity to be disposed of
and improving the intervention of the parties
involved in the life cycle of such products.
FRANÇAIS ESPAÑOL
63