Maintenance Operations - WOLFF 2 LP Original Bedienungsanleitung

5.3

Maintenance operations

Attention!
All the described operations must be done with the plug disconnected from the power socket.
Before starting any maintenance or cleaning job, always wear adequate protective clothing, eyewear
and/or gloves according to the type of job to be done.
For smooth vacuum cleaner operation, a number of controls are best made periodically:
Check to see whether the filter is worn or has become too permeable.
Make sure the sealing gaskets of the motor head base, of the filter-holder ring and of the Longopac®
container are working efficiently.
The electrical parts (plugs, switches, cables, etc.) must not be faulty.
The screws and nuts must always be tight.
Make sure the Longopac® container is not overfull. This should be emptied when the vacuumed
material has reached 3/4 of maximum capacity.
Check the integrity of the flexible vacuum hose and accessories to be used.
If the flexible hose is perforated, the power of the cleaner will be reduced and dust and liquids will leak
into the environment.
Warning!
All maintenance and repair jobs must be performed directly by UZIN UTZ TOOLS GMBH & CO. KG or its
authorised dealers.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10
E-Mail tools@uzin-utz.com | Internet www.wolff-tools.de
- - 25 -