Installation - WOLFF 2 LP Original Bedienungsanleitung

3.2

Installation

Warning!
Before installing the vacuum cleaner, carefully make a sight check to pinpoint any damage suffered
during transport.
In the event of any component parts being damaged, do not proceed with installation. Notify the
manufacturer and reach an agreement on how to proceed.
The vacuum cleaner already features a suction filter.
First of all pull the red handle on the right side of the vacuum cleaner and unlock the sliding system.
The vacuum cleaner will raise automatically, however it is possible to use the superior handle to guide the
movement with a balanced force.
Pull the vacuum cleaner until the lock will have reached its position.
If the operator notes that the movement become difficult, remove the side cover, loosen the screws and if
necessary put some grease on the sliding system.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10
E-Mail tools@uzin-utz.com | Internet www.wolff-tools.de
- - 15 -