Open the flap as indicated in the picture below allowing the air to flow into the filtering chamber thus
providing a counter air flow that passes through the filter. Repeat this operation for at least 5 times.
Once the cleaning process has finished, remove the cap from the suction inlet and connect the
accessories to continue the vacuum process.
If the orange light indicator is still on, repeat the filter cleaning process. If after this second cleaning
process the orange light is still on, replace the filter with a new one.
Warning!
During vacuuming, avoid rolling up or twisting the flexible hose
Warning!
Never use the machine with the filter blocked.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10
E-Mail tools@uzin-utz.com | Internet
www.wolff-tools.de
- - 23 -