Technical Information; Declaration Of Conformity - Spit 352 Bedienungs- Und Wartungsanleitung

Technical information

Characteristics
Noise
Vibration
Declaration
of conformity
8
Voltage
Amperage
Frequency
Power input
Idle running
Rotation speed
Hammer rate strokes
Impact energy
Weight
Cable length
Carbons
Angel of chisel
Switch
Tool fixing
Class II
Measured values determined according to EN 60745. Typically the A-weighted noise
levels of the tool are:
Sound pressure level:
Sound intensity level
Wear ear protection!
Vibration total values (triax vector sum)
determined according to EN 60745
Vibration emission
value m/s²
Uncertainty m/s²
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to com-
pare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibra-
tion such as: maintain the tool and the accessories, keep the hands warm, organisa-
tion of work patterns.
We declare under our sole responsibility that this product is in conformity with the
following standards or standardized documents:
EN 60745-1, EN 60745-2-6, IEC 60745-1, IEC 60745-2-6, EN 55014-1, EN 55014-2,
EN 61000-3, in accordance with the regulations 2004/108/EC, 2006/42/EC.
Didier BOURRETTE
Technical file at: Jens Stellwag
SPIT S.A., Route de Lyon - B.P. 104, F-26501 Bourg-les-Valence
SPIT 352
110 V 220-240 V
9.8 A 4.6-4.8 A
50-60 Hz
1100 W
0-600 min
0-400 min
0-3000 min
max. 10 J
6.3 kg
4 m
self-disconnecting
16 positions
with electronic control
S2S max
chisel: (97+3) dB(A)
chisel: (108+3) dB(A)
352 SVC
drill a
h,HD
chisel a
h,CHeq
K
Jens STELLWAG
SPIT 452
110 V 220-240 V
9.8 A 4.6-4.8 A
50-60 Hz
1100 W
-1 ---
-1 ---
-1 0-3200 min
max. 11 J
5.9 kg
4 m
self-disconnecting
16 positions
with electronic control
S2S max
drill: (92+3) dB(A)
drill: (103+3) dB(A)
352 452
9.8 17.9 - -
7.2 11.4 15.9
1.5 1.5 1.5
-1
452 SVC
- -
7.2
1.5