Repair Instructions - T4W PIK GUN CLASSIC Bedienungsanleitung & Ersatzteilliste

Repair instructions

a: blue tube wrench size 10
b: housing
c: internal tube wrench 14
D : switching unit
wrench size 16
screw the new spare part
(c) with the internal tubę
with wrench size 14 into
the housing. Then screw
the switching unitę in place
with wrench size 16 and
brace with wrench size 14.
Downloaded from www.Manualslib.com
PIK
unscrew and remove with
screw wrench size 10 the blue
tubę (a) from the housing (b).
remove any residue from
the sealing tape from the
interna! thread of the housing
Wrap the thread of the blue
tube with sealing tape and
remove any protruding ends
of sealing tape with a knife.
manuals search engine
GUN CLASSIC
q
unscrew and remove the size
16 switching unit (D) from size
14 (c) above it. brace with a
size 14 open-jaw wrench
Lay the blue tubę (a) over
the internal tube (c) and
screw it into the housing
(b) with wrench size 10.
9
Thoma • Tel./Fax: +48 95 741 11 62 • info@t4w.eu • www.t4w.eu
with brush
Then unscrew and remove the
thread with the tubę from the
housing with wrench size 14.
cut off the protruding internal
tube (c) so that it is level
with the blue tube (a). Then
twist open the spout.