Omnitronic XDP-3002 Handbuch Seite 15

13 BPM TAP
Button
14 Press control
TRACK/FOLDER
15 Button SINGLE
16 Button CUE
17 Button
18 Buttons PITCH BEND
19 Button REPEAT
20 Button TIME
21 Mounting points
22 CD drive
23 Button CD/USB/SD
24 USB port
25 POWER switch
To determine the beats per minute (BPM) for the current tile simply tap
the button to the beat of the music until the value is indicated in the display
• Turn the control to browse titles, and then press it to select the
desired title; title number and title name are indicated in the display
• For selecting folders, first press the control, and then turn it to
browse the folders. Press the control again to select the desired
folder. Afterwards, the unit switches back to the title selection mode.
Engages single title playback mode (the unit will play one title and
stop). Otherwise, all titles of the CD or the selected folder will be
played.
As default setting pressing CUE will cause the player to enter pause
mode at the starting point (time index 0:00:00) of the title (button lights
red). To set the cue point at a different spot of the title, enter pause
mode and use the jogdial (set to search mode) to go to the exact spot.
As soon as playback is started a new cue point is memorized (button
flashes repeatedly). Holding down the CUE button changes the
function to preview, and allows you to stutter start or play from the cue
point.
Switches between play and pause. During playback the blue LED
lights, in pause mode it flashes.
The Pitch Bend feature creates a temporary change of speed; as long
as you keep the buttons pressed, the beat of the title is slowed down
(-) or increased (+)
For selecting the repeat functions:
• first actuation: continuous repeat of the title selected
• second actuation: continuous repeat of all titles of the CD or the
current folder
• third actuation: normal playback
• Audio CD: Switches the time indication between elapsed, remaining
title and total remaining time
• MP3: Switches the time indication between elapsed and remaining
title time
The device is intended for installation in a 19" rack (483 mm), but can
also be used as a desktop device. In any case, air must be able to flow
unhindered through all ventilation openings to ensure adequate
cooling. For rack installation, 2 units are required. You can fix the unit
with four screws M6 in the rack.
For inserting a CD
Switches between CD, USB and SD operation
For inserting a USB storage medium
Turns the unit on (LED indicator lights) and off
15 • EN