Risk Of Burns; Installation Requirements - ECG TK 2070 Bedienungsanleitung

WARNING: This heater is not equipped with a device for measuring the
room temperature. Do not use the heater in small rooms occuppied by
individuals that are not capable of leaving the room without assistance,
unless proper supervision is available.
WARNING: Use the device always only in the upright position (base on
the bottom, controls at the top). Any other position is dangerous.
The surfaces marked in this way become hot during use.

Risk of burns!

DO NOT COVER! Danger of fire.
DANGER for children: Children may not play with the

Installation requirements

Place the radiator on a flat surface that provides sufficient free space
for proper venting. There must be a distance of at least 1 m between
the device and surrounding objects. The heater must not be operated
without the bases fitted.
INSTALLATION
Make sure that the package contains all the parts required to assemble the convector. Contact your vendor if
this is not the case.
Package contents:
1. Heat convector: 1 piece
2. Base: 2 pieces
3. Attachment screws: 4 pieces
Mounting of stands
6
Do not immerse in water!
packaging material. Do not let children play
with the plastic bags. Risk of suffocation.
1. Turn the convector upside down.
2. Attach the base so that the holes in a convector line up with the holes in the
base.
3. Tighten the screws carefully and check if the convector is stable.