Schüco MPE 230 PG03 Modulmontage Seite 17

IMPORTANT
► The PV module may not be installed near open flames or in the immediate vicinity of
flammable materials.
► Installation of the module in corrosive saline, ammoniacal or sulphurous areas is not
permitted.
► Never separate the solar generator from the inverter while it is connected to the power
network.
IMPORTANT
04.2012
Do not dismantle or
drop the module.
Do not bend the
module.
Use both hands!
Do not lift the
modules by the
junction boxes.
Maximum module
load:
5400 Pa
Do not expose the
module to sunlight
during installation;
cover the front of
the module with
opaque material.
274 116
Ensure all contacts
are kept clean and
dry.
Do not step on the
module.
Do not use pointed
or sharp objects
with the module.
Artificially
concentrated
sunlight shall not
be directed on the
module!
Ensure module is
aligned in the best
available tilt and
oriention.
90°
EN
17