Instar IN-9020 Bedienungsanleitung Seite 27

1 - Wall Bracket
2 - Ceiling Bracket
3 - Antenna Connector
4 - Infrared LED
5 - Autofocus Lens
6 - Photo Sensor
7 - PIR Sensor
8 - Microphone
9 - MicroSD card slot
10 - Network LED
11 - Network Port
12 - Alarm Out
13 - Power Connector
14 - Connection Cable
Go to http://install.instar.com
Wall mounting
Overhead installation
RP-SMA WiFi antenna connector (not for PoE version)
6 high-powered IR LEDs (nightvision @ 850nm)
4x optical zoom lens with autofocus (2.8mm - 12mm)
Twilight switch for IR LEDs
Integrated Panasonic passive infrared (PIR) motion detector
For noise detection and audio recording
For MicroSD/SDXC cards (max.128GB - 16GB included)
Indicator for network status
On: connected to network by network cable
Off: No power, Wifi connection or no network cable connected
RJ45 LAN port / connector for Cat5e LAN cable or higher
Relay - can be used with external alarm devices
For included 12V / 2A power supply
With LAN- and power connector as well as alarm output
6-EN