Product Features - Instar IN-9020 Bedienungsanleitung

3. Product Features

Hardware
WDR Sensor
Autofocus Lens
MicroSD Card
PIR Sensor
Microphone
Alarm Output
Software
Privacy Areas
Alarm Areas
Alarm Triggers
Pre-Recording
Notifications
Alarm Server
Video Recording
Video Stream
Photo Series
Optical Zoom
Connectivity
P2P
DDNS
Cloud
FTP Upload
WPS
WiFi
HTTPS
Go to http://install.instar.com
Full HD WDR Panasonic CMOS sensor / resolution 1920 x 1080px
Varied focal lens: 2.8mm ~ 12mm ( 36 ~ 120º diagonal field of view)
Max. 128GB (16GB incl.) for alarm or manual recording (15 sec.)
Integrated Panasonic passive infrared motion detector
Integrated microphone for sound recording
Relay - switches external alarm devices (for example a Siren)
Mask areas for privacy concerns
Define four areas for software motion detection and link with PIR
Supports motion, heat and noise detection
Alarm videos start three seconds before the trigger event
Alarm emails and push (text) notifications in case of an alarm trigger
Send alarm triggers to third party devices such as home automations
15s alarm and/or manual recording on SD
Supports stream protocols like RTSP, RTP, RTMP, ONVIF, MJPEG...
Interval snapshots for website integration or time lapse videos
4x optical zoom with autofocus
Free point-2-point connectivity with InstarVision, works with IPv6
Free DDNS address to connect to your camera via the internet
Optional upload & management of alarm videos in the INSTAR Cloud
Upload alarm images / videos to an FTP server (FTP or secure FTPS)
Use WiFi Protected Setup (WPS) to easily establish a WiFi connection
2.4Ghz WiFi with IEEE 802.11b/g/n and WPA/WPA2 encryption
Access the WebUI via HTTPS with secure TLS/SSL encryption
4-EN