Switching Off; Temperature Regulation; Fastfreeze Function - Electrolux IK329SA Benutzerinformation

8 www.electrolux.com
It is possible to change predefined sound
of buttons by pressing together Mode
4.2 Display
A
4.3 Switching on
Connect the mains plug to the power
socket.
Press the ON/OFF button if the display is
off.
The temperature indicators show the set
default temperature.
To select a different set temperature
refer to "Temperature regulation".
If DEMO appears on the display, refer to
"Troubleshooting".
If the door remains open for
a few minutes, the light will
turn off automatically. The
light is reset by closing and
opening the door.

4.4 Switching off

Press the ON/OFF button for 5 seconds.
The display turns off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.

4.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulator.
Default set temperature:
• +5°C for the fridge.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
B C D
H G F E
and temperature colder button for a few
seconds. Change is reversible.
A. Timer indicator
B. FastCool function
C. FastFreeze function
D. Temperature indicator
E. Alarm indicator
F. ChildLock function
G. DrinksChill function
H. DYNAMICAIR function
4.6 FastCool function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the FastCool function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1. Press the Mode until the
corresponding icon appears.
The FastCool indicator flashes.
2. Press the OK to confirm.
The FastCool indicator is shown.
The FastCool function shuts off
automatically after approximately 6
hours.
To switch off the function before its
automatic end, repeat the procedure.
The function switches off by
selecting a different fridge
set temperature.

4.7 FastFreeze function

The FastFreeze function accelerates the
freezing of fresh food and, at the same
time, protects foodstuffs already stored
from undesirable warming.
1. To activate this function press the
Mode button until the corresponding
icon appears.
The FastFreeze indicator flashes.
2. Press the OK button to confirm.
The FastFreeze indicator is shown.
This function stops automatically after 28
hours.