Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safeguards; Care And Cleaning - Scarlett SC-262 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SC-262:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
GB
INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

· Please read this instruction manual carefully before use and keep in a safe place for future reference.
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the
mains voltage in your home.
· For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it was
happened DO NOT TOUCH the appliance, unplug it immediately and check in service center.
· Do not take this product into a bathroom or use near water.
· Close supervision is necessary when it is used near children.
· Do not leave the appliance switched on when not in use.
· Do not use other attachments than those supplied.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance
in the nearest service center only.
· Keep the cord away from sharp edges and hot surfaces.
· Do not place or store appliance where it can fall or be pulled into a tub or sink.
· Do not pull, twist, or wrap the power cord around appliance.
· Never drop or insert any object into any opening on this appliance.
· Do not put operating appliance on any surface, it may cause injury or damage.
· Do not use this appliance with a damaged comb, or with teeth missing from the blades as injury may occur.
NOTE: KEEP BLADES OILED.
· Do not use the hair clipper when the skin is infected.
· Do not use the hair clipper on animals.
OILING
· To maintain your clipper in peak condition, the blades should be oiled after every haircut.
· Do not use hair oil, grease, oil mixed with kerosene or any solvent.
INSTRUCTIONS FOR HAIR CUTTING
· Before starting the hair cut inspect the clipper, making sure that there is no oil between the cutting blade teeth,
switch the unit on to distribute the oil and to check running smoothness. Wipe off any excess oil. This should be
done after each use. While using the unit, untwist the cord from time to time to avoid tangling.
· Before cutting always first comb the hair thoroughly.
USE
· To switch on hair clipper turn On/Off switcher to 1 position (Off
· To start charging turn On/Off switcher to 0 position and connect appliance (Base unit) to power supply via mains
plug. The indicator light goes on.
· Before first time use, the hair clipper battery must be fully dischargd and then charged.
· It takes near 10 hours to charge batteries first time.
· Every futher loading phase takes approx. 8 hours.
ATTENTION: Indicator light will not go out after batteries are fully charged.
· Usage time with fully charged batteries is approx. 60 min.
· Recharge battery at least once in 6 months, even the clipper is not in use.
· You may cut during charging (indicator light is off).
REMINDERS
· When cutting with this hair clipper it is better to leave the hair dry, not wet.
· Always take off a little at a time.
· For even cutting do not force clipper. Also remember to comb the hair more frequently to remove trimmed hair
and check for uneven strands.
· Hold detachable comb by the two grips and carefully slide arms into corresponding grooves until click.
· Release grips.
· Push comb adjustment knobs and slide it to one of 5 available positions to set desirable cutting length.
· You may also use the clipper without the attachment - remove it in reverse order.
THINNING OUT FUNCTION.
· Thi function allows to reduce hair volume without changing their length.
· To move out thinning blade, turn thinning control slider to position 1.

CARE AND CLEANING

· Switch off the appliance and unplug it.
· Clean and oil the appliance after each use.
· Remove detachable blades unit:
· Hold the appliance as for work with logotype upward.
· Moving a finger forward, push unit teeth, so unit will release.
www.scarlett-europe.com
Downloaded from
www.Manualslib.com
manuals search engine
0 position).
5
SC-262

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis