Sony BKM-243HSM Gebrauchsanweisung Seite 8

Overview
The BKM-243HSM HD/D1- SDI Input
Adaptor is a video signal input adaptor for
Sony monitors. When installed in an input
option slot on the main unit, it provides video
input and output connectors for the main unit
and a decoder for HD/D1 serial digital
component signals.
Notes
• There are some monitors that are not
compatible with this unit.
To check if the monitor is compatible with
this unit, refer to the instructions for use for
the monitor.
• The model name displayed on the monitor's
STATUS menu is "BKM-243HS."
Function
Decoder for serial digital component
signals
The BKM-243HSM is equipped with a built-in
decoder for serial digital component signals.
Serial digital input and output signal
connector
The BKM-243HSM is equipped with two input
and one monitor output connectors for serial
digital signals.
8
Overview / Function / Using the Input and Output Connectors
Using the Input and
Output Connectors
For information about installing the BKM-
243HSM in an input option slot on the main unit,
refer to the instructions for use for the monitor.
Configuration of input/output
connectors and signals that may be
input
The configuration of the input and output
connectors, and the signals that may be input
are shown below.
1
1 2
INPUT
1 Input serial digital component signals.
2 Output serial digital component monitor
signals.
Input of serial digital component
signals
You can input serial digital signals to
connectors 1 and output signals displayed on
the screen of the main unit or the monitor from
connector 2.
You need not attach the 75Ω termination to
connector 2.
Notes
• The MONITOR OUT connector outputs
signal only when the power of the main unit
is ON.
The MONITOR OUT signal is not output
when the monitor is in standby mode.
• The signal from the MONITOR OUT
connector does not comply with ON-LINE
output signal specifications.
2
BKM-243HS
DIGITAL/HD SDI
MONITOR OUT