Bestway POWER STEEL Benutzerhandbuch Seite 51

OPERATION
CONTROL VALVE OVERVIEW
WARNING: To prevent equipment
damage and possible injury, always switch
off sand filter before changing the Control
Valve function. Changing valve positions
while the pump is running can damage
the Control Valve, which may cause
personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle
and rotate to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6
different filter functions: Filter, Closed, Backwash, Rinse,
Drain and Circulate.
Filter:
This function is used to filter
pool water and should be positioned
here 99% of the time. Water is pumped
through the sand filter, where it is
cleaned and returned to the pool.
A
303021216264_58515GS_14x21cm_800Gal 德规砂滤器说明书 英
C
C
B
10
Closed:
This function stops water
flowing between the sand filter and the
pool.
C
A
C
B