To Insert And Remove The Battery - Petsafe Pet Containment System PIF-275-19 Betriebsanleitung

To Insert and Remove the Battery

Note: Do not install the battery while the Receiver Collar is on your pet.
®
This Receiver Collar utilizes a replaceable PetSafe battery (RFA-67).
This unique battery is designed to make battery replacement easier
and increase water protection.
To insert the battery, align the
symbols on the battery (arrow)
and Receiver Collar (triangle).
Use a large coin to turn the
battery clockwise until the arrow
lines up with the lock symbol on
the housing.
To remove the battery, turn the
battery counter-clockwise using
a large coin. DO NOT attempt
to cut into or pry open the
battery. Be sure to discard the
used battery properly.
®
A replacement PetSafe
battery (RFA-67) can be found at many retailers. Contact the
Customer Care Center at 1-800-732-2677 or visit our web site at
www.petsafe.net to locate a retailer near you.
www.petsafe.net 3