Motion CM-03 Gebrauchsanweisung Seite 22

23 Channel select 5 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
23.1
from which the
blinds must be
copied.
All blinds in the selected
23.3
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or a different
remote. Select a new
channel on the (new)
remote.
24 Channel select 15 channel remote
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
1
Select the channel
24.1
you would like to
copy.
All blinds in the selected
24.3
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or to different
remotes. Select a channel
on a (new) remote.
M O TI ON C M - 0 3 / 05 LI - I O N T U BU L A R M O TO R
To activate
23.2
channel select,
simultaneously
hold the channel
selection button
and press the pair
button.
Press the pair
23.4
button on the (new)
remote to pair the
blinds with the new
channel.
To activate
24.2
channel select,
simultaneously hold
the channel selection
button and press the
pair button.
3
Press program
24.4
button on the (new)
remote to pair the
blinds with the
(new) remote.
To exit channel
23.5
select, go back to the
channel selected at
step 23.1 and repeat
step 23.2
1
To exit channel
24.5
select, choose
the channel you
selected at step 24.1
and repeat step 24.2