Technical Data; Accessories - Conel CLEAR 2.0 KD Montage- Und Betriebsanleitung

48
11

TECHNICAL DATA

The following applies for all the models of the device:
/ The water to be filtered must conform to the European Drinking Water Regulations!
/ The nominal flow rates given in the table are valid for a clean filter.
Technical data
Connection diameter nominal
Nominal flow rate to DIN EN 1567
Nominal pressure
Operating pressure
Adjustable discharge pressure
Factory setting
Mesh size
lower mesh width
upper mesh width
Water and ambient temperature
Fitting length with screw connection
Fitting length w/o screw connection
Threaded connection according to
Weight
11.1

ACCESSORIES

/ Clear 2.0 SAFE. Central water monitoring system for installation between built-in rotary flange and
cartridge filter with pressure reducer. For monitoring the water consumption and shutting off the wa-
ter pipe when adjustable limits are exceeded. Protects against the effects of water pipe bursts, leakag-
es, defects on the domestic water installation and unusually high water consumption. Detects leaking
taps and valves.
CLEAR 2.0 KD ¾"
DN 20
2.3 m³/h
PN 16
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
180 mm
100 mm
DIN EN 10226-1
3.4 kg
CLEAR 2.0 KD 1"
DN 25
3.6 m³/h
PN 16
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
195 mm
100 mm
DIN EN 10226-1
3.6 kg
CLEAR 2.0 KD 1¼"
DN 32
5.8 m³/h
PN 16
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
230 mm
110 mm
DIN EN 10226-1
4.1 kg