Technical Data; Accessories - Conel Clear 2.0 R Montage- Und Betriebsanleitung

52
11

TECHNICAL DATA

The following applies for all the models of the device:
/ The water to be filtered must conform to the European Drinking Water Regulations!
/ Nominal flow rate after backwashing at a pressure loss of 0.2/0.5 bar as given in the table below.
/ The nominal pressure denotes the pressure class, according to which the filter must fulfill the require-
ments of the standards DIN EN 13443-1 and DIN 19628. The maximum operating pressure is lower,
in order to ensure the optimum function of the backwashing filter.
Technical data
Connection diameter nominal
Nominal flow rate at a pressure loss
of 0.2/0.5 bar (20/50 kPa)
Backwashing volumetric flow
Nominal pressure
Operating pressure
Mesh size
lower mesh width
upper mesh width
Water and ambient temperature
Fitting length with screw connection
Fitting length without screw connection
Threaded connection according to
Weight
1) Applies for a completely opened flushing water valve and 2 - 3 bar (
11.1

ACCESSORIES

/ Clear 2.0 Automatic controls retrofit kit. For subsequent upgrade of the manual backwashing filter
to an automatic backwashing filter.
/ Clear 2.0 SAFE. Central water monitoring system for installation between built-in rotary flange and
backwashing filter. For monitoring the water consumption and shutting off the water pipe when ad-
justable limits are exceeded. Protects against the effects of water pipe bursts, leakages, defects on the
domestic water installation and unusually high water consumption. Detects leaking taps and valves.
1)
CLEAR 2.0 R 1½"
DN 40
6.8/11.2 m³/h
approx. 0.3 l/s
PN 16
1.5 - 10 bar
(150 - 1000 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
252 mm
160 mm
DIN EN 10226-1
8.5 kg
200 - 300 kPa
CLEAR 2.0 R 2"
DN 50
8.5/14.0 m³/h
approx. 0.3 l/s
PN 16
1.5 - 10 bar
(150 - 1000 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
280 mm
164 mm
DIN EN 10226-1
9.7 kg
) mains pressure.