Getac E110 Bedienungsanleitung Seite 7

Using System Recovery
Use System Recovery when:

The Windows operating system does not
start at all.

You want to restore the system to the
factory state.
WARNING: All data on the hard disk drive
will be lost.
To run System Recovery:
1. Connect the AC adapter.
2. Connect an external USB keyboard.
3. Turn on the computer. During system
startup when the Getac logo screen
appears, double-tap the screen. In the
menu that appears, select App Menu and
then HDI Recovery.
Or, if a keyboard is connected, you can
press Ctrl + Alt + F2 keys for four seconds
instead of tapping the screen.
4. In the screen that appears, select Recovery
to start the recovery process.
5. The progress bar shows the percentage
completed. When it reaches 100%, the
system turns off.
6. Turn on the computer. The Windows setup
wizard starts. Follow the onscreen prompts
to continue.
7. When the system restarts, the installer
screen appears. The installer will perform
system hardware detection and driver
installation.
8. When completed, the system restarts and
displays Windows desktop.
5