Lamp Test - NAMCO Maximum Tune2 Handbuch

(c)

Lamp Test

1. Press the Service button to select LAMP TEST and press the Test button. The
following screen is displayed.
SELECT WITH SERVICE BUTTON
2. Press the Service button to select the required item then press the Test button.
3. Press the Service button to select 'EXIT' then press the Test button to return to
the I/O Test Menu Screen.
(a) VIEW CHANGE
(B) INTRUDE CHANGE
LAMP TEST
VIEW CHANGE
INTRUDE CHANGE
EXIT
AND PRESS TEST BUTTON
: Display changes from OFF to ON and the button lamp
lights when the Test button is pressed.
: Display changes from OFF to ON and the button lamp
lights when the Test button is pressed.
Page 57
OFF
OFF
(a)
(b)