Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
GENERAL DESCRIPTION
The device is provided with:
4 indicator LEDs: 3 for system status and 1 for the alarm memory;
2 alarm inputs
The reader can be installed on Bticino Magic frames and on Bticino TT MATIX frames using the Bticino
adapter code A5374/1. The adapter is provided to allow installing the reader on Simon Urmet nea frames.
Furthermore, the reader may be inserted as point in the following wiring systems using optional adapter
frames (Ref. 1056/337, 1033/036, 1033/038),: Bticino Living Light / International, Bticino Living, Bticino
Axolute (Ref. 1033/036), Gewiss Playbus, Vimar Idea, Vimar Plana, Vimar Eikon (Ref. 1033/038). The
reader is powered by the bus, which connects it to the control panel and is configured by programming.
WARNING: This document provides only some essential product information.
Refer to 1067 and 1068 series control panel manuals for more detailed information.
The contact key readers are devices for reading the electronic key ref. 1067/332.
The reader is provided with 4 LEDs for indicating system state and zones arming state.
The following states are assumed:
The zones are off
The zones are armed
Key not recognised
OPERATION
TOTAL ARMING AND DISARMING
Insert the key and pull it out when the yellow LED blink.
The 3 green LEDs indicate the state of the monitored zones: LED on corresponds to zone active. If multiple
zones are associated with a LED, the LED will blink when they are not all armed. The possibility of activation
of each zone depends on the programming of the reader and the key used.
PARTIAL ARMING
Insert the key; after a few seconds, the reader will indicate the possible combinations for a partialization,
starting with the last performed.
To confirm the choice hold the Key. The LEDs indicate the armed zones.
NOTE: If you use a key is not acquired (key not recognized), the green LED will blink rapidly.
2
GREEN LED
Off:
On:
Blinking:
YELLOW LED
It assumes the following states:
On fixed:
Alarm stored or fault present
Blinking:
Presence of at least one open input in the system
Fast Blinking:
Key present
DS1067-083B
Werbung
Inhaltsverzeichnis
