Controllable Functions - Märklin H0 BR E 50 Gebrauchsanleitung

Controllable Functions

Headlights/marker lights
Sound effects: Locomotive whistle
Sound effect: Blower
Switching range (only ABV)
Operation with the Mobile Station / Central Station
• Set the locomotive on the track. The locomotive auto-
matically registers itself in the locomotive list.
• The locomotive will not communicate back to the
controller when:
the speed bar on the Mobile Station blinks.
the mfx symbol has a line beneath it on the Central
Station.
• Taking the locomotive out of the locomotive list:
1. Remove the locomotive from the track.
2. Delete the locomotive entry.
It is not necessary to change the address.
Continuously
function + off
on
— f2
— f3
— f4
Changing Locomotive Parameters with the
Mobile Station / Central Station
1. Select the locomotive from the locomotive list.
2. Change to the submenu "EDIT LOC".
3. Go to the submenu „VMAX" (maximum speed),
4. Enter the new value and accept it into the system.
Please note the information in the instructions for the
Mobile Station / Central Station.
The VMAX has been preset at 88% (Mobile Station) and
at 225 (Central Station) on the model in order to give
good running characteristics. Raising this value further
will not increase the speed; it will only have a negative
effect on the running characteristics.
1
STOP
Headlight button
Button 4 with symbol
Button 8 with symbol
Button 2 with symbol
„ACC" (acceleration), „DEC" (brakes), or
„RESET" (resetting the decoder to factory default
settings).
f8 f8
f0
5
systems
central
station
60212
mobile station
Button f0 with symbol
Button f2 with symbol
Button f3 with symbol
Button f4 with symbol
f0
7