Inhaltsverzeichnis; Machine Information; Technical Specifications; Safety Instructions - Ferm CDM1094 Originalbetriebsanleitung

EN
Li-iOn driLL
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of European leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for many
years to come.
The numbers in the following text correspond
with the pictures at page 2-3.
Read this manual carefully, before using
the machine. Ensure that you know how
the machine works, and how it should be
operated. Maintain the machine in
accordance with the instructions, and
make certain that the machine functions
correctly. Store this manual and other
enclosed documentation with the
machine
intended use
The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic and
plastic, as well as screwdriving.
The machine is not intended for other purposes.
Not suitable for construction site usage
Please inspect the machine and accessories for
transit damage.
Contents
1. Machine information
2. Safety instructions
3. Operating
4. Maintenance

1. MACHinE inFOrMATiOn

Technical specifications

Voltage
Frequency charger
Voltage charger
Rotational speed, not loaded
4
Max. bit diameter
Weight
Lpa
Lwa
Vibration (main grip)
Vibration (auxiliary grip)
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
-
-
Protect yourself against the effects of
vibration by maintaining the tool and its
accessories, keeping your hands warm, and
organizing your work patterns.
Product information
Fig. A
1. SDS-plus tool holder
2. Locking sleeve
3. Mode selection lever
4. Battery status indicator
5. Indicator for left/right rotation
6. Rotation direction switch
7. On/Off switch
8. Charger connection

2. SAFETY inSTrUCTiOnS

Explanation of the symbols
14.4 V - 1.3Ah
50/60 Hz
220-240 V
0-900 /min
Concrete
Steel
Wood
using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual
Indicates electrical shock hazard
Ø 10 mm
Ø 8 mm
Ø 16 mm
1.275 kg
80.5+3 dB(A
91.5+3 dB(A)
5.915 + 1.5 m/s
2
5.44 + 1.5 m/s
2
Ferm