Maintenance; Protecting The Environment - DeWalt dw920 Handbuch

● To stop the tool, release the switch.
● To lock the tool in off position, move the
forward/reverse slider (2) to the central position.
Screwdriving (fi g. A1)
● Select forward or reverse rotation using the
slider (2).
● Set the collar (4) to position 1 and begin
screwdriving (low torque).
● If the clutch ratchets too soon, adjust the collar
to increase the torque as required.
Drilling (fi g. A1)
● Select forward or reverse rotation using the
slider (2).
● Set the collar (4) to drilling mode and begin
drilling.
Screwdriving and drilling
If the tool will be used in elongate position and
highest MR please hold tool with both hands.

MAINTENANCE

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
WARNING: To reduce the risk of injury,
switch off and disconnect the tool from
the power source before installing and
removing accessories, before adjusting
or changing set-ups or when making
repairs. Be sure the tool is switched off.
An accidental start-up can cause injury.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often
as dirt is seen collecting in and around
the air vents. Wear approved eye
protection and approved dust mask
when performing this procedure.
WARNING: Never use solvents or other
harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Optional accessories
Consult your dealer for further information on the
appropriate accessories.
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D WALT, recommended
E
accessories should be used.

Protecting the environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you fi nd one day that your D
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
E N G L I S H
WALT, have
E
WALT product
E
35