Temperature Controller; Before Initial Operation - Pkm KS242.0 A++ Bedienungsanleitung

T
EMPERATURE CONTROLLER
1
ILLUMINANT
2
G
LASS SHELVES
3
Break-proof glass cover
4
C
RISPER
5
A
DJUSTABLE FEET
6
D
OOR
7
D
OOR TRAYS

4.2 Before initial operation

WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for 4 - 6 hours
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.3
food in the appliance. If you place food in the appliance before it has
reached its normal operating temperature, this foods can spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait 4 - 6 hours to
ensure proper operation.
4. The settings of the temperature of the fridge can be adjusted manually. To do
this, turn the temperature controller for the temperature setting to the desired
preference. (s. chapter 4.3 S
5. If operation was interrupted, wait 5 minutes before restart.
6. The appliance needs some time to balance temperatures when you have
changed the settings before or when you have stored additional food in the
appliance. The duration of this period of time depends on the range of the
(positioning depending on model)
(total number: four)
H
ANDLE
(total number: four)
SETTING OF THE TEMPERATURE
).
ETTING OF THE TEMPERATURE
/
INTERNAL LIGHT
) before you place any fresh
51
/
COVER OF THE
CLEANING AND
).