System requirements
Activate Bluetooth con-
nection
Verbindung aufbauen
Authentifizieren
Bluetooth-Zugangscode
eingeben
VEGAMET 861 • 4 ... 20 mA/HART
9
Setup with PC/notebook (Bluetooth)
9.1
Preparations
Make sure that your PC/notebook meets the following system require-
ments:
•
Operating system Windows 10
•
DTM Collection 12/2019 or newer
•
Bluetooth 4.0 LE or newer
Activate the Bluetooth connection via the project assistant.
Note:
Older systems do not always have an integrated Bluetooth LE. In
these cases, a Bluetooth USB adapter is required. Activate the
Bluetooth USB adapter using the Project Wizard.
After activating the integrated Bluetooth or the Bluetooth USB adapt-
er, devices with Bluetooth are found and created in the project tree.
9.2
Verbindung herstellen
Wählen Sie im Projektbaum das gewünschte Gerät für die Online-
Parametrierung aus.
Beim ersten Verbindungsaufbau müssen sich Bedientool und
Steuergerät gegenseitig authentifizieren. Nach der ersten korrekten
Authentifizierung erfolgt jede weitere Verbindung ohne erneute Au-
thentifizierungsabfrage.
Geben Sie dann im nächsten Menüfenster zur Authentifizierung den
6-stelligen Bluetooth-Zugangscode ein:
Sie finden den Code auf dem Informationsblatt "PINs und Codes" in
der Geräteverpackung:
9 Setup with PC/notebook (Bluetooth)
33