Transport, Packaging And Storage; Inspection After Transport; Packaging; Storage - Casselin CFP1 Benutzerhandbuch

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Inspection after transport

The check for the absence of damage and the completeness of the device must be carried out upon receipt
of the package. In the event of identification of damage due to transport, refuse or accept the delivered
product only with reservations *. A complaint detailing the defects observed must then be made. The
perception of damage is only possible in the event of a complaint formulated within the prescribed time limits,
ie 24-48 hours at most.
* written on the carrier's delivery papers or digital.

3.2 packaging

The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.

3.3. Storage

WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.

4. EQUIPMENT CHARACTERISTICS

* Subject to change
Model
Diameter of the pizzas
Weight of dough pieces
Roll dimensions
Electrical data
Dimensions
The device is composed of a metallic steel structure, two groups of rollers and their respective protections.
The rollers are driven by belts. It is equipped with an electric gear motor controlled by a switch, power cable,
scale, two slides and optionally a control pedal connected by a special socket.
NOTE
The A-weighted sound pressure level measured on a test machine is a constant result and less than 70dB
(A)
CFP1
140 to 300 mm
80 to 210 grams
310 mm
250 W / 230 V
W 440 x D 380 x H 615 mm
CFP2
260 to 400 mm
210 to 700 grams
420 mm
370 W / 230 V
W 540 x D 410 x H 720 mm
EN