Cleaning The Clipper Head; Cleaning The Air Filter - VOSS.farming 85290 Handbuch

INSTRUCTION MANUAL VOSS.FARMING EASYCUT PRO
8.1

CLEANING THE CLIPPER HEAD

Clean the clipper head regularly. The cleaning cycle depends on the frequency of use.
Clean the head as soon as the blades are changed at the latest.
CAUTION
Keep your fingers away from the sharp edges of the blades to avoid injury.
1. Switch off the clipper and disconnect the clipper from the power supply.
2. Remove the blades as described in section 7.4.
The inside of the clipper head is exposed.
3. Clean the inside of the head and the blades thoroughly with the cleaning brush.
4. After cleaning, reinstall and oil the blades as described in section 7.4.
8.2

CLEANING THE AIR FILTER

Clean the air filter regularly. The cleaning cycle
depends on the frequency of use. Clean the air filter
as soon as you detect any contamination in the air
filter at the latest.
1. Switch off the clipper and disconnect the clipper
from the power supply.
2. Remove impurities around the air filter.
3. To clean the air filter (5), remove the air filter (5)
from the clipper.
4. Clean the filter with the cleaning brush (fig. 6).
NOTICE
Make sure that no foreign bodies or impurities enter the machine during cleaning.
5. Put the air filter (5) back into the clipper.
WARNING
Do not use the clipper without an air filter.
85290 | 11 | 2020 | V2
Fig. 6
25
DE
EN
EN
FR
IT
NL
SV
ES
PL