Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY
ATTENTION: Do not connect the machine to the power supply until assembly is complete. Failure
to comply could result in serious injury.
HANDLEBAR ASSEMBLY
1.
Insert the lower handles into the holes and make sure you insert them completely into your home.
2.
Lock the screws on each side.
1
3.
Slide the cable holder through the upper handle.
4.
Connect the middle handle to the upper handle by inserting the holes through the bolts in the upper handle
and secure it by screwing in the knobs.
5.
Perform the same step to connect the central handle with the lower one.
6.
Attach the clip to hold the cable.
INSTALLATION OF THE COLLECTION BASKET
1.
Lift the protective cover of the machine, align the mounting holes of the collection basket with the M
projections on the machine body.
2.
To remove the collection basket, lift the protective cover, lift the basket upwards and remove it from the
machine body.
1
2
49
EN
Werbung
Inhaltsverzeichnis
