Technical Data; Assembly - Greencut GLM660X Betriebsanleitung

78

TECHNICAL DATA

Engine
Cylinder capacity
Power
Starter system
Ignition system
Type of fuel
Fuel capacity
Oil type
Handlebar height adjustment
Blades
Cutting height
Cutting width
Grass catcher capacity
Chassis
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify technical data without prior notice.

ASSEMBLY

ATTENTION: The lawn mower is supplied without fuel and oil in the engine. Your new lawn mower
has been tested at the production site which means that the engine can contain a small amount
of residual oil.
ASSEMBLY OF THE HANDLEBAR
1. Carefully unfold the handlebar of the mower, taking care not to pinch or damage the control cables of the
machine.
2. Remove the screws (3a) from the lower handlebars (3) and keep them handy (Fig. 1).
3. Insert the lower links (3) into the supports (4) up to the end. Make sure that the mounting holes of the lower
links are aligned with those of the brackets (Fig. 2).
GLM660X
Gasoline 4-stroke OHV
139cc
5cv / 3000rpm
Reversible manual
0.8L
Unleaded 95
0.45L
10W30, 10W40, 15W30 y 15W40
Central adjuster
1 unit
25-75mm / 7 cutting heights
407mm (16")
40L
Plastic
96 dB(A)
18Kg