Technical Data; Assembly - Greencut GLM880X Betriebsanleitung

TECHNICAL DATA

Engine
Cylinder capacity
Power
Starter system
Fuel capacity
Type of fuel
Oil Capacity
Oil type
Traction
Handlebar height adjustment
Blades
Cutting height
Cutting height
Grass catcher capacity
Chassis
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.

ASSEMBLY

ATTENTION: The lawn mower is supplied without fuel and oil in the engine. Your new lawn mower
has been tested at the production site which means that the engine can contain a small amount
of residual oil.
HANDLE BARS
The handlebar comes assembled; however, it must be fixed to the assembly brackets.
1. Remove the nuts and fixing screws from the handlebar assembly brackets.
2. Pull the handle adjustment levers (1) outwards to unlock them and unfold the handlebar (2), then push the
levers back into the locked position (3).
GLM880X
Gasoline 4-stroke OHV
218cc
7.5hp / 3000rpm
EASY-START Manual
1,2L
Lead-free 95
0.6L
10W30 / 10W40 / 15W30 / 15W40
Rear
Central adjustment
1 unit of 58x504mm
25-70mm / 8 heights of cut
504mm (21")
65L
Steel
98dB(A)
33Kg
81
EN