Assembly - Greencut GLM770XE Betriebsanleitung

82

ASSEMBLY

ATTENTION: The lawn mower is supplied without fuel and oil in the engine. Your new lawn mower
has been tested at the production site which means that the engine can contain a small amount
of residual oil.
ASSEMBLY OF THE HANDLEBAR
Insert the bottom of the handlebar into the appropriate hole and secure it with the screws and knobs. Then insert the
upper part of the handlebar so that the holes match. Secure the handlebar by placing and adjusting the lock/unlock
knobs and levers.
PLACE THE CONNECTING CABLE
Fix the connection cable to the handlebar with the supplied clamps.
Screw
Tweezers
Lever