Installation Of The Instrument - Consort C3 10-Serie Anleitung

Inputs
The measuring electrodes should be connected to the coaxial connectors CH1 or
CH2. Automatic temperature compensation and measurement are possible by
connecting a Pt1000 temperature compensator to the banana connectors °C1 or
°C2. Without compensator,
automatically switched on. Model C34xx has two extra DIN connectors in parallel
with CH.1 and CH2. NEVER use DIN- and BNC- channels together!
Outputs
A standard USB or Ethernet port is provided for interfacing the instrument with a
computer or network.
A standard RS232 port is provided for interfacing the instrument with a printer.
Data is sent in the ASCII code at a BAUD rate of 1200...115200 bps (8 bit, no
parity, 1 stopbit).
Language
1. Press MODE.
2. Select [SYSTEM] and press OK.
3. Select [LANGUAGE] and press OK.
4. Select the desired language and press OK.
Contrast
1. Press MODE.
2. Select [SYSTEM] and press OK.
3. Select [CONTRAST] and press OK.
4. Adjust the contrast and press OK.
Date and time
1. Press MODE.
2. Select [SYSTEM] and press OK.
3. Select [DATE/TIME] and press OK.
4. Select [MODIFY] and press OK.
5. Adjust date and time and press OK.
Password
1. Press MODE.
2. Select [SYSTEM] and press OK.
3. Select [PASSWORD] and press OK.
4. A private code can be programmed to avoid undesired access to the
instrument. Select [YES] and press OK to enter your secret sequence of 5
keys.
Stand by
1. Press MODE.
2. Select [STAND BY] and press OK.
3. Select [YES] (= continue automatically after a power failure) or [NO] (=
instrument can be switched off).
Channels
1. Press MODE.
2. Select [CHANNELS] and press OK.
3. Select the desired channel and press OK.
4. Select the desired range and press OK.
5. Select the desired input for temperature compensation and press OK.
User standard tables
1. Press MODE.
2. Select [USER TABLES] and press OK.
3. Select [pH buffers] or [S/cm standards] and press OK.
4. Follow the instructions on the screen to enter the different values. The value
for 25°C is obligatory!
All manuals and user guides at all-guides.com
the manual temperature
2

Installation of the instrument

compensation is