Changing The Button Settings - Xerox 7600i Benutzerhandbuch

Changing the Button Settings

1. Click on the One Touch icon.
2. Right-click a button on the One Touch Button Panel.
Right-click on a button (for
example the Scan button)
and the Properties window
opens for that button.
3. The One Touch Properties window opens.
The One Touch Properties window will also open when you press, hold down for 3 seconds, and release a
scanner button.
Scanner button
configuration tab
Select the
Destination
Application that
will open when
you are finished
scanning. You use
the destination
application to
view and work
with your scanned
images.
Some of the options on the One Touch Properties Window are "grayed out" and are not available, these
options are not appropriate for your scanner model.
Select the destination you want One Touch to send the scanned image to in the Select destination list.
4.
If you select a word processing program such as Microsoft WordPad or Microsoft Word that can be used for
OCR (such as TXT or RTF), the text in scanned images is automatically converted to word processing text.
5. Select a file format in the Select format panel.
The formats are based on the type of Destination Application you select. The icon names indicate their file
types. See File Formats
Select a scanning configuration in the Select configuration list.
6.
The configuration's basic settings include: scanning mode, resolution (dpi), page size, brightness (Br), and
contrast (Cr). To see a selected scan configuration's settings, click its icon. Click the icon again to close the
detailed information. Refer to
instructions on creating and modifying scan configurations.
7. Click on OK to save the changes.
8. Place an item in the scanner and click the One Touch button to start scanning.
42 Xerox 7600i
User's Guide
on page 54 for more information about the available formats.
Scan Configurations on page 47 and Configure Before Scan
Select a file format
for your scanned
images.
Select a
configuration for
scanning the item.
on page 58 for