Herunterladen Inhalt Inhalt Diese Seite drucken

Adjustment; Flow Diagram; En Instructions For Use / Assembly Instructions - HANSGROHE Avista Gebrauchsanleitung, Montageanleitung

Vorschau ausblenden Andere Handbücher für Avista:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fitting must be installed, flushed and tested after
the valid norms.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
The product is exclusively designed for drinking water!
4
English
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
max. 70°C / 4 min
Assembly see page 31
Symbol description
Do not use silicone containing acetic acid!

Adjustment

To adjust the hot water limiter on single lever
mixers, please see page 32. Using a hot
water limiter in connection with a continuous
flow water heater is not recommended.
Dimensions (see page 33)

Flow diagram

(see page 33)
Operation (see page 34)
Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolonged
period of non-use.
Cleaning (see enclosed brochure)
Spare parts (see page 35)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Test certificate (see page 36)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

31802 serie

Inhaltsverzeichnis