Connecting An External Device; Connecting Using An Hdmi Cable (Capable Of Dolby Atmos Decoding And Playback); Connecting Using An Hdmi Cable - Samsung HW-Q70R Bedienungsanleitung

05 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired or wireless network to play the external device's sound
through the Soundbar.
Connecting using an HDMI Cable (Capable of Dolby Atmos decoding
and playback)
• When you use Dolby Atmos®: If the input source is Dolby Atmos®, 3.1.2 channels are outputted.
When Dolby Atmos® is active, the Soundbar's sound effect modes controlled by the SOUND MODE
button are not available.
• Important: This product supports Dolby Atmos® only in HDMI mode.
External Device
1. Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on
your digital device.
2. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI
IN jack on your TV.
3. Press the (Source) button on the right side panel or on the remote control, and then select
"HDMI".
4. "HDMI" mode is displayed on the Soundbar display panel and sound plays.
NOTE
• When Dolby Atmos® is activated, "DOLBY ATMOS" appears in the front display.
HDMI OUT
HDMI Cable
HDMI IN
HDMI Cable
(ARC)
ENG - 16

Bottom of the Soundbar

HDMI


Right Side of the Soundbar