Functions - Nabo KGK 1662 Benutzerhandbuch

3.2 Functions

(The picture above is only for reference. The actual configuration will depend on the physical product
or statement by the distributor)
1) Key
A. Set key (Temperature setting button of refrigerator compartment)
2) Display screen
LED①setting 1: 6° C
LED②setting 2: 4° C
LED③setting 3: 3° C
LED④setting 4: 2° C
3) Display
Once initially powered on, the display screen is on full display for 3s. and then the refrigerator runs according
to setting 2(4° C).
In case of a failure, the corresponding LED blinks.
In case of no failures, it shows the actual temperature setting of refrigerator.
4) Temperature setting
Each time the temperature setting button A is pressed once, the temperature setting changes one time. After
the temperature setting has been completed, the refrigerator will run according to the set value after 30s.
The shift regulation is:
setting 1 (6° C)
5) Super freeze mode
Long press temperature setting key for 3s, after the LED② and LED③ lighting for 30s, it will enter into
Super freeze mode.
Long press temperature setting key for 3s could cancel Super freeze mode.
Fault Code Fault Description
LED①
Ambient temperature sensor
LED③
Refrigerator defrost sensor
LED④
Refrigerator temperature sensor circuit
setting 2 (4° C) setting 3 (3° C)
12
setting 4 (2° C)