DeWalt DWS520 Originalanweisungen Seite 28

EN GLI SH
DWS520 PLUNGE SAW
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical Data
Voltage V
DC
Type
Power Input W
No-load speed min
-1
Blade diameter mm
Maximum depth of cut
90˚ (without guide rail) mm
90˚ (with guide rail) mm
Blade bore mm
Bevel angle adjustment
Weight kg
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty) dB(A)
L (sound power) dB(A)
WA
K (sound power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a =
h
a = m/s²
h
Uncertainty K = m/s²
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
26
DWS520 DWS520
QS/GB LX
220-240 115
3 3
1300 1300
Fuses:
1750-4000 1750-4000
Europe
165 165
U.K. & Ireland
59 59
Defi nitions: Safety Guidelines
55 55
The definitions below describe the level of severity
20 20
for each signal word. Please read the manual and
47˚ 47˚
pay attention to these symbols.
5 5
92 92
3 3
103 103
3 3
2.8 2.8
1.5 1.5
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DWS520
D WALT declares that these products described
E
under "technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-5.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.