Steering Wheel; Safety Precautions - Modster Dasher Betriebsanleitung

User Manual
Pairing The Transmitter & Receiver
1. Turn on the receiver power. Press the SW switch.The receiver's LED should start flashing.
2. Turn on the transmitter.
3. When the LED on the receiver becomes solid,the binding process is completed.
Note: Radio systems installer in RTRs have already been bound. Only when installing a new transmitter or receiver is the
above process necessary
Operation
A. THROTTLE TRIGGERB
Fail safe function setting
Please turn on the TX, then pull the TH trigger anywhere you want to and hold it, press the SW button
of the receiver about 2sec,the LED should start flashing for 5sec,then release SW button and
TH trigger, turn off the TX .
Using Caution While Operating

Safety Precautions

24
LED

. STEERING WHEEL

MODSTER DASHER V2
1. Push the trigger
forward to slow down
or brake.
2. Pull the trigger backward
to accelerate.
www.modster.at