Contents; Technichal Details - Modster Dasher Betriebsanleitung

User Manual
LiPo-Balance-Charger
• After connecting the charger to a socket (230V), the LEDs light up green (charger ready for operation).
• When the battery is connected to the 2S or 3S socket, the LEDs light up red, the charging process is running.
• When the battery is full, when only the green LEDs light up, the battery can be disconnected.
• The charger is now disconnected from the mains.
• The charging current is about 1 A. A LiPo battery with 3000 mAh has a charging time of about 3 hours.
General safety instructions
• Regularly check the tooth flank play between the motor pinion and the main gear wheel in order to ensure good force transmission and
to avoid damage.
• Check that all screws are firmly seated, as they can be released by impacts and vibrations.
• Tires should not show cracks or damage.
• Check the connections for correct contact and damage.
Water Resistant
The MODSTER Dasher is designed so that the motor, regulator and servo are splash-proof, ie can be operated under humid conditions.
Splash-proofed means only that a device can withstand water sprays, but it must not be immersed in water, or exposed to excessive humidity
or strong rain for a long time.
The vehicle must never be immersed completely in the water.
Driving in wet conditions also requires additional maintenance. The transmitter is not splashproof. Please protect it from rain and water. After
driving, remove all water and dirt from the vehicle and completely dry the vehicle. Ball bearings, metal parts and swing pins must be lubrica-
ted after driving in a humid environment.
4. Information
The model is an all-wheel-drive RC car chassis with a built-in brushless electric motor and a 2.4 GHz receiver, a programmable electronic dri-
ving controller and a steering servo.
The RC model is pre-mounted ready for use and comes with a remote control transmitter.
The model is intended for both indoor and outdoor usage.
The chassis is light and torsion-resistant. The encapsulation protects the transmission from dirt and stones.
The electronic speed controller is optimally tuned to the engine and impresses with its excellent starting behavior, acceleration and constant
running characteristics. The powerful steering servo has a high positioning torque and high positioning speed with maximum stability.
A servo saver also protects the servo against violent impacts against the wheels. With the 2.4 GHz remote control system, you have a radio
remote control system that is ideally suited for model cars and model ships. Two control functions can be operated remotely via the propor-
tional function channels.
The 2.4 GHz transmitter and the receiver tuned to it do not operate on a frequency fixed by transmitter and receiver quartz. Transmitters and
receivers scan the frequency band after an available, free frequency, after which the radio connection is established.
Intended Use
The product is designed exclusively for private use in the model building sector and with the associated operating times. This product is not
approved for commercial or industrial use or for continuous operation. Improper use can lead to the risk of injury to persons as well as to
damage to the product and the associated hazards, e.g. loss of control over the model, short circuit, fire, electric shock, etc.
Observe the safety instructions in this manual. These contain important information on handling the product.
The product is suitable for children under 14 years of age only under adult supervision.
Dispose of the model, battery and charger at the end of their life according to the legal regulations.
Please avoid longer full throttle rides and allow the motor, ESC and battery to cool down during rides!
5. Contents MODSTER DASHER
built up RTR model
2,4 GHz rc system
steering servo
electric motor
ESC
charger
battery
manual

6. Technichal Details:

Scale
Dimensions ( L/B/H)
ESC
Motor
Battery
www.modster.at
1:8
510x355x180 mm
80A
3000
3S 11,1V 3200mAh Li-Po
MODSTER DASHER V2
21