Dear customer,
Thank you for buying our high quality, expandable gong Ritmo. Please read
the following operating instructions through carefully before starting the gong.
1. Intended use
The gong is only designed to be used with the appropriate batteries or with
an 8V transformer (only when operating with a wired gong module). Never
connect it to other voltages.
2. technical data
Dimensions:
Voltage:
Operating temperature:
Batteries:
Operating frequency of radio module: 433MHz
Loudness:
The gong conforms to the applicable European CE guidelines.
3. Operating elements and connections
Fig. 1
(1) Volume controller (VOL)
(2) Module slot for wired gong module or radio module
(3) Expansion slot for sound module or USB-module
(4) Battery compartment for 1.5V battery (LR14 Baby)
(5) Connections for bell wiring
(6) „SEL "-selector for melody selection at T3
(7) Slide switch: „SEQ" - for changing melody at T3;
„SET" – to use a selected melody at T3
(8) Rotary switch to select the house code
4. Opening the gong
To open the gong, release the cover from the base (Fig. 2), if necessary
use suitable work tools (e.g. screwdriver) to push in the latches of the cover.
16
120 x 175 x 50mm
8-12V~
0°-40°C
4x1.5V~ LR14 Baby (not included)
max. 80dB/A