Pelgrim MSL620ERVS Anleitung Seite 50

MAINTENANCE
1
2
Lighting
GB 8
Removing filter cassette
1 Switch off the flap and lighting.
2 Using the recess, press the filter backwards and tip it downwards
at the front.
3 Remove the filter from the hood.
Reinstalling filter cassette
The filter has to be installed with the locking mechanism to the side.
Open the locking mechanism. This pulls the projections to the side of
the filter inwards. When installing the filters hold the locking mechanism
in this position.
1 Push the projections at the side of the filter into the openings
provided for this purpose at the side of the extractor hood.
2 Hinge the filter upwards.
3 Release the locking mechanism. The projections at the side
of the filter move outwards into the openings provided for this
purpose at the side of the extractor hood.
The filter is now correctly positioned.
Lampen auswechseln
MSL620
• Remove the grease filters.
• This gives access to the light bulbs.
• Unscrew the bulb from the fitting and replace it with a bulb
matching the wattage stated at the inside of the hood.
MSL920
• Entfernen Sie die Abdeckkappe von der Lampe.
• Tauschen Sie die Halogenlampe gegen eine neue Lampe mit
maximal 20 Watt aus.
• Setzen Sie die Abdeckkappe wieder auf.