Open The Door - AEG L 87485 FL Benutzerinformation

18
3. The display shows the default tem-
perature, the spin speed and the
empty indicator bars of the availa-
ble functions.
4. To change the temperature and/or
the spin speed, press the related
buttons.
5. Set the available functions.
6. Press button
gramme. The indicator of button
is on.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1. Press button
flashes.
2. Press button
programme continues.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Press button
flashes.
2. Change the function set.
4 to start the pro-
4 . The indicator
again. The washing
4
to cancel the pro-
1
1 again to activate
. The indicator
4
SET THE DELAY START
1. Press button
until the display shows the number
of minutes or hours. The related
symbols comes on.
2. Press button
starts the countdown of the delay
start.
When the countdown is completed,
4
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
CANCEL THE DELAY START
1. Press button
cator flashes.
2. Press button
until the display shows 0'.
3. Press button
starts.

OPEN THE DOOR

While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Press button
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
the drum.
5 again and again
4 , the appliance
4
. The related indi-
4
again and again
5
. The programme
4
4 . The door lock
. The programme or the
to