Exsys EX-6032 Anleitung Seite 26

English EX-6032
7. Virtual COM Software
7.3 Configuration of the Virtual COM software
The Virtual COM software shows you the settings which you have made.
To make changes to a COM port that you created, click „Edit". If you want to remove a
COM port, first select the COM port and then click on „Remove" or click on „Remove
all" directly.
Register and Transfer the COM Ports into the Device Manager :
Click on „Update all" to transfer the COM ports into the device manager.
Now the COM ports should be entered in the device manager. See next picture!
© Copyright 2017 by EXSYS Vertriebs GmbH. All Rights Reserved
26