Ec Declaration Of Conformity - Black & Decker hp9096 Handbuch

ENGLISH
Remove all screws from the battery cover.
x
Remove the battery cover.
x
Remove all screws from the housing.
x
Open the housing.
x
Pull the battery out and disconnect the wires to remove it
x
from the tool.
Place the battery in a suitable packaging to ensure that
x
the terminals cannot be short-circuited.
NiCd and NiMH batteries are recyclable. Take them to
x
any authorised repair agent or a local recycling station.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com.
Technical data
Voltage
No-load speed
Max. torque
Bit holder
Max. drilling capacity in steel/wood
Weight
Charger
Input voltage
Approx. charging time

EC declaration of conformity

Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC, EN 50260, EN 55014,
EN 60335, EN 61000
L (sound pressure): $ dB(A), L
pA
hand/arm weighted vibration < 2.5 m/s
6
HP9096
V 9.6
DC
-1
min 0 - 650
Nm 8.3
1/4" (6.35 mm hex)
mm $/$
kg 1.5
V 230
AC
h 3
(acoustic power) $ dB(A),
WA
2
Colin Wills, Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
If a Black & Decker product becomes defective due to faulty
materials, workmanship or lack of conformity, within 24 months
from the date of purchase, Black & Decker guarantees to
replace defective parts, repair products subjected to fair wear
and tear or replace such products to ensure minimum
inconvenience to the customer unless:
The product has been used for trade, professional or hire
x
purposes;
The product has been subjected to misuse or neglect;
x
The product has sustained damage through foreign
x
objects, substances or accidents;
Repairs have been attempted by persons other than
x
authorised repair agents or Black & Decker service staff.
To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
check the location of your nearest authorised repair agent by
contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.