Precor Rear Delt / Pec Fly Benutzerhandbuch Seite 57

3. Route cable around the floating pulley.
Figure 8: Cable route on floating pulley
4. Route cable around the pulley on the base support.
Figure 9: Pulley route on equipment
Rear Delt/Pec Fly Assembly Guide: Routing the Cable Assembly
5. Make sure the bolt is fully threaded.
Figure 10: Cable route on floating pulley bracket
6. Tighten nut with ³ ₄-inch wrench to 600 in-lb (67 N-m)..
7. Tighten the pulley bolts to 500 in-lb (56 N-m) and re-install all pulley
covers.
7